Senosan AMX1700X

Technical Data sheet

Construction: Coextruded ABS/PMMA sheets with high gloss, scratch resistant acrylic top layer. Surface protection PE foil with special adhesive layer.

Thickness : Varies from 0.75mm to 1mm depending on colour

Mechanical properties                Test Method     Unit        Values

Abrasion resistance                 DIN 53754(mod) mg/50 U    2

Scratch resistance                   DIN 68861/T4      N                0.9
                                                                      Rating group 
                                                                          4E

Assessment of surface to
mechanical damage                 DIN 53799/T4.4.2   mm        8

Assessment to cold liquids         DIN 68861 /T1 Rating group
                                                                          B1               

Assessment of surface resistance
to dry heat                                   DIN 68861/T7    Degrees C  
                                                                         Rating group 7D  75

Assessment of surface to
resistance to wet heat            DIN 68861/T8   Degrees C
                                                                        Rating group 8B   70

Assessment of surface resistance
to water vapour                          DIN 53799/T4.11    no visible changes

Optical properties

Top surface gloss               Seno Standard             GLE ( gloss units) >85 GLE 
                                           60 degree glossmaster                            high gloss

Weatherability, UV                 EN ISO 4892-2                                       1,7
Resistance Delta E                Total colour difference
Furniture applications,           after 200 h Xenon-Test
Indoor application    

Additional

Density                                   DIN 53479               g/cm3              1,09+/-0.02 
Burning Resistance                  UL Standard 94                                94HB